TM 10-3510-208-34
b.
Disassembly.
(1)
Refer to the following instructions and
remove the controls and instruments from the control
box.
(a)
Washer
Reversing
Switch.
Refer to figure 6-4 or 6-5 and remove the washer
reversing switch.
(b)
Signal Light. Refer to figure 6-
4 remove the signal light.
(c)
Auto-Manual Switch. Refer to
figure 6-4 and remove the auto-manual switch.
(d)
Wash and Pre-Extract Switch.
Refer to figure 6-4 and remove the wash and pre-extract
switch.
(e)
Brake-Drain Switch. Refer to
figure 6-4 or 6-5 and remove the brake-drain switch.
(f)
Extract Switch. Refer to figure
6-4 or 6-5 and remove the extract switch.
(g)
Hot Water Switch. Refer to
figure 6-4 or 6-5 and remove the hot water switch.
(h)
Cold Water Switch. Refer to
figure 64 or 6-5 and remove the cold water switch.
(i)
Signal Switch. Refer to figure
6-4 or 65 and remove the signal switch.
(j)
Reversing Timer. Refer to
figure 6-4 or 6-5 and remove the reversing timer.
(k)
Terminal Block. Refer to
figure 6-4 or 6-5 and remove the terminal block.
(l)
Extractor Starter. Refer to
figure 6-4 or 6-5 and remove the extractor starter.
(m)
Fuseholder. Refer to figure 6-
4 or 6-5 and remove the fuseholder.
(n)
Transformer. Refer to figure 6-
4 or 65 and remove the transformer.
(o)
Relay. Refer to figure 6-4 or 6-
5 and remove the relay.
(p)
Magnetic Control Solenoid
and Air Valves. Refer to figure 6-4 or 6-5 and remove
the magnetic control solenoid and air valves.
(q)
Reversing Switch. Refer to
figure 6-4 or 6-5 and remove the reversing switch.
6-13
