TM 10-3510-208-34
b.
Installation.
(1)
Install the control panel assembly (20,
fig. 2-25) and secure to the trailer with lockwashers
(19), bolts (18), washers (17) and nuts (16).
(2)
Install the lockwashers (15) and bolts
(14) securing the control panel assembly (20) to the
hose guard.
(3)
Install and reconnect the wires (12)
and tighten the connectors (13).
(4)
Position the cover (10) onto the
junction box (11) and secure with screws (9).
(5)
Reconnect the wires (7 and 8) to
proper components within the control box assembly.
(6)
Position the cover (5) onto the
junction box (6) and secure with screw (4).
(7)
Position the cover (2) onto the conduit
receptacle (3) and secure with screw (1).
(8)
Install the control box door (2, fig. 2-
24) and secure with latches (1).
2-12.
Washer-Extractor Assembly
a.
Removal.
(1)
Refer to figure 2-26 and remove the
washer-extractor holddowns.
(2)
Refer to figure 2-27 and remove the
washer-extractor assembly.
2-39
