TM 10-3510-208-34
(2)
Remove the screws (1, fig. 2-25) and
remove the cover (2) from the conduit receptacle (3).
(3)
Remove the screws (4) and remove
the cover (5) from the junction box (6).
(4)
Tag and disconnect the wires (7 and
*) from components within the control panel assembly
(5)
Remove the screws 91) and remove
the cover (10) from the junction box (11).
(6)
Tag and disconnect the wires (12),
backoff connectors (13) and remove wires.
(7)
Remove the bolts (14) and
lockwashers ,(15) securing the control box assembly
(20) to the hose guard.
(8)
Remove the nuts (16), washers (17),
bolts (18) and lockwashers (19) and remove the control
panel assembly (20) from the trailer.
Key to Figure 2-25.
1.
Screw
11.
Junction box
2.
Cover
12. Wire
3.
Receptacle
13. Connector
4.
Screw
14.
Bolt
5.
Cover
15. Lockwasher
6.
Junction Box
16. Nut
7.
Wire
17. Washer
8.
Wire
18. Bolt
9.
Screw
19. Lockwasher
10.
Cover
20. Control panel
assy
Figure 2-25. Control box assembly, removal and installation (sheet 1 of 5).
2-34
