TM 10-3510-209-24
2-23. POWER DISTRIBUTION PANEL (CONT)
REPAIR (Cont)
d.
Tag and disconnect three wires (14) from
breaker (15).
e.
Remove three screws (16) and lockwashers (17)
and remove breaker (15).
f.
Install new breaker (15) and secure with three
screws (16) and lockwashers (17).
g.
Connect three wires (14) to breaker (15).
Remove tags. Refer to FIGURE 2-1 for proper
connection.
h.
Install face plate (13) and secure with four
screws (12).
i.
Install two border panels (11) and two border
panels (10) and secure with four screws (9).
3.
Remove
corrosion,
replace
damaged
wires,
tighten loose junctions, and replace damaged
sheet metal, hinges, or latch as necessary.
2-89