TM 10-3510-209-24
2-33. DRUM FILL AND HOSE ASSEMBLY (CONT)
REPAIR (Cont)
c.
Remove two male connectors (5) and
remove caps (6) from connectors.
d.
Remove two screws (7), two lockwashers
(8), and two flat washers (9). Remove
block (10) with adapter pipe (11) from
nipple (12).
e.
Remove adapter pipe (11) from block (10).
f.
Remove cover (13) from nipple (12).
2.
Repair drum fill adapters by replacing defective
components.
3.
Assembly.
a.
Install cover (13) on nipple (12).
NOTE
Use pipe thread compound (Item 5,
App C) on pipe threads before
installation.
b.
Install adapter pipe (11) in block (10).
c.
Install block (10) and adapter pipe (11) in
nipple (12) and secure with two screws
(7), two lockwashers (8), and two flat
washers (9).
d.
Install two male connectors (5) in nipple (12) and snap two caps (6) on connectors.
e.
Install pipe connector (4) on adapter pipe (11) and install extension adapter (3) on pipe connector.
2-114 Change 1
