TM 10-3510-209-24
1-4. PREPARATION FOR STORAGE OR SHIPMENT. (CONT)
d.
Disconnect and drain all fuel supply and drain lines. Install protective caps on fuel pump inlet and outlet
connections. Stow all fuel lines in bins.
e.
If stowage is for more than 5 days, perform the following:
(1)
Close the burner fuel shutoff valves on both the dryer and the water heater.
(2)
Operate the units a few minutes after the burner shutoff valve is closed. This allows the blower to purge
any vaporized fuel from the burner.
(3)
Remove the end of fuel feed hose assembly from the supply drum and place it in a quart container filled
with OE-30 oil (Item 17, App C). Operate both units until the container is empty and the burner stops.
(4)
Install protective caps on fuel pump inlet and outlet connections.
f.
Stow water pump and work platform in transport position.
1-5. NOMENCLATURE CROSS-REFERENCE.
Common Name
Official Nomenclature
Alarm Box
Box, safety warning
Compressor
Compressor, air
Controller
Program control, washer
Control Stand
Stand, controller
Dryer
Drying tumbler
Dryer bin
Bin assembly, dryer
Extractor
Extractor, laundry, centrifugal
Extractor Bin
Pre-extraction bin
Generator
Generator set, diesel engine driven,
10 kW, 60 Hz
Ground Rod Holder
Holder assembly, ground rods
Laundry
Model M85 laundry unit, trailer-mounted
Platform
Work platform
Trailer
Trailer, cargo, 5-ton, Model M10-61 El
Washer
Washing machine, laundry, open end
Water heater
Heater, water, liquid fuel fired, Model M-80
1-6. REPORTING EQUIPMENT IMPROVEMENT RECOMMENDATIONS (EIR). If your laundry unit needs improvement,
let us know. Send us an EIR. You, the user, are the only one who can tell us what you don't like about your equipment.
Let us know why you don't like the design or performance. Put it on an SF 368, (Product Quality Deficiency Report). Mail
it to: Commander, US Army Aviation and Troop Command, ATTN: AMSAT-I-MDO, 4300 Goodfellow Blvd., St. Louis,
MO 63120-1798. A reply will be furnished to you.
1-7. WARRANTY INFORMATION. The laundry unit components are warranted by the manufacturer for 12 months. The
warranty starts on the date bound in block 23, DA Form 2408-9, Equipment Control Record, in the log book Report
defects in material or workmanship to you supervisor, who will take appropriate action through your unit maintenance
shop.
1-2 Change 4
