TM 10-3510-209-24
3-13. WASHER DRIVE MOTOR MAINTENANCE
This task covers:
a. Removal
b. Disassembly
c. Repair
d. Assembly
e. Installation
INITIAL SETUP
Tools
General Safety Instructions
General mechanic's tool set
SC 5180-90
WARNING
Lifting device (forklift or crane)
Components of drive unit are heavy and may
Personnel Required
be awkward to handle. Use correct lifting
procedures, lifting devices, and/or
MOS 63J (2)
assistance from other personnel to avoid
injury.
Materials/Parts
Equipment Condition
Washer repair parts (as required)
TM 10-3510-209-10, Tarp assembly removed
Paragraph 3-10, Drivebelt removed.
REMOVAL
Refer to paragraph 3-10 and remove drive motor and gear reduction unit in accordance with DISASSEMBLY procedures,
steps 1 and 2.
DISASSEMBLY
Disassemble drive motor.
a.
Match mark each end cap (24) to motor frame (25) for assembly purposes.
b.
Remove four nuts (26), four lockwashers (27), and bolts (28) from motor frame (25).
c.
Remove end nut (29) and washer (30).
d.
Separate end caps (24) from motor frame (25).
e.
Remove armature (31) from motor frame (25).
f.
Remove end bearings (32) from end caps (24).
3-42 Change 1
