TM 10-3510-209-24
3-20. WATER HEATER ELECTRIC CONTROL ASSEMBLY (CONT)
ASSEMBLY (Cont)
10.
Connect wires (15) to power limit switch (1) and
secure with six screws (14). Remove tags.
Install power limit switch and two screws (13) on
circuit box (3).
11.
Install receptacle (4).
a.
Insert receptacle (4) inside circuit box (3)
and secure with three screws (11) under
receptacle cap.
b.
Connect five wires (12) to rear of
receptacle (4). Remove tags.
c.
Install cover plate (10) and secure with
four screws (9).
NOTE
FOLLOW-ON-MAINTENANCE:
Install tarp and dry clothes bin
assemblies (TM 10-3510-209-10).
3-100 Change 2
