TM 10-3510-209-24
3-20. WATER HEATER ELECTRIC CONTROL ASSEMBLY (CONT)
ASSEMBLY (Cont)
7.
Install motor contactor (7) and three screws (21)
and washers (22) on control box. Connect 10
wires at input and output terminals of motor
contactor. Remove tags.
8.
Install low water relay (8) and tighten three
screws (20). Connect wire lugs to terminals with
eight screws (19). Remove tags.
9.
Install overload heaters (6) and four screws (18)
on power limit switch (1). Install cover (5) on
back of power limit switch.
Change 2 3-99
