TM 10-3510-220-10
2-9.
OPERATING PROCEDURES. (CONT)
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(10)
(11)
(12)
With master switch (8) ON and Auto/Off/Manual switch (11) in OFF -
press unlock switch (2) and unlock door and load the washer with up to
60 lb. (27.2 kg) of wash. Table 2-3 lists the weights of specific clothing
items.
Check the air tank pressure gage for a pressure of at least 60 to 90 psi
(414 to 580 kPa).
Select the proper formula from FM 10-280.
NOTE
The washer drain switch (10) must be in closed
position before water inlet valves will operate.
Set drain (10), water (12 and 13), and level (9) switches for desired
operation.
Set Auto/Off/Manual switch (11) to manual and set manual timer (3) to
time called for in formula.
Add proper supplies through soap chute (1).
NOTE
Washer will continue to run indefinetely, when manual
timer times-out audible signal will sound and timer
light (5) will come on, but, machine will not stop
agitating until Auto/Off/Manual switch (11) is
switched to OFF.
When signal goes off switch drain (10) to OPEN to drain water.
Set water (12 and 13) and level (9) switches for next desired operation,
then position drain switch (10) to CLOSED.
This will enable the
washing machine to fill with water of the proper temperature to the
proper level.
Set manual timer (3) to time called for in formula.
Continue sequence until formula is completed.
Upon completion of manual operation position Auto/Off/Manual switch
(11) in OFF and switch drain (10) to OPEN to drain water.
Push unlock switch (2) on door lock cover and open door.
NOTE
Door lock switch is interlocked with lever switches.
If washing machine still contains water door will not
unlock until washing machine has drained. This is a
safety feature to protect operator from accidental
scalding.
(13) Transfer laundry to the pre-extraction bin.
2-62
