TM 10-3510-220-24
2-35. DRUM FILL AND HOSE ASSEMBLY (CONT)
REPAIR (Cont)
2.
3.
c. Remove two male connectors (10)
d .
e.
f.
and remove caps (9) from connectors.
Remove two screws (8), two lockwashers
(7), and two flat washers (6). Remove
block (12) with adapter pipe (11) from
nipple (13).
Remove adapter pipe (11) from
block (12).
Remove cover (5) from nipple (13).
Repair drum fill adapters by
replacing defective components.
a. Install cover (5) on nipple (13).
NOTE
Use pipe thread compound (Item 5, App C)
on pipe threads before installation.
b.
c.
d.
e.
Install adapter pipe (11) in
block (12).
Install block (12) and adapter
pipe (11) in nipple (13) and
secure with two screws (8),
two lockwashers (7), and
two flat washers (6).
Install two male connectors (10) in nipple (13) and snap two caps (9) on connectors.
Install pipe connector (3) on adapter pipe (11) and install extension adapter (4) on pipe
connector.
2-107
