TM 10-3510-220-24
2-36.
WATER HEATER BURNER HEAD AND NOZZLE ASSEMBLY (CONT)
INSTALLATION
1.
Install burner tube (9) and gasket (10) on
water heater (11) and secure with four
lockwashers (8) and nuts (7). Tighten nuts
evenly.
2.
Install nozzle and electrode assembly (6) in
burner tube (9) and secure with three
lockwashers (5) and nuts (4).
CAUTION
The water heater burner head and nozzle
assembly is a sensitive device. Rough
handling can damage the scanner and result
in possible failure of flame safeguard control.
3.
4.
5.
6.
Connect scanner (3) to nipple (23) and tighten
firmly.
Connect two ignition cables (1) to two spark
plugs (12).
Connect fuel line (2) to elbow (17).
Perform follow-on installation.
Check water heater for proper operation
(TM 10-3510-220-10).
Install tarp assembly (TM 10-3510-220-
10).
2-115
