TM 10-3510-220-24
2-15.1. RIGHT CENTER SUPPORT (FOR WATER REUSE SYSTEM)
This task covers:
a.
Inspection
b.
Removal
c. Repair
d.
Replace
e.
Installation
INITIAL SETUP:
Tools
Equipmemt Condition
General mechanic’s tool kit,
TM l0-3510-220-10, Tarp, ladder, struts and
Heli-arc welding equipment (as needed)
left beam assembly removed.
Painting equipment (as needed)
Paragraph 2-16, Basket assembly removed.
Personnel Required
Paragraph 2-17, Upper and lower sound deadening
Two
panels removed.
General Safety Instructions
WARNING
Trailer bed can be cluttered and is slippery when if wet. Use care when climbing
onto or walking around the mounted equipment.
INSPECTION
Inspect beam assembly for cracks,
breaks, bends, corrosion, missing
hardware, and other damage that
weakens the metal.
REMOVAL
1.
Remove 2 lock nuts (1), bolts (2)
and washers (3) attaching 2 brace
cups to center support (5).
2.
Remove brace cup (4).
3.
Loosen right and center beam by
removing 2 lanyard pins (6).
4.
Remove 2 lock nuts (7), bolts (8)
and washers (9) attaching center
support to trailer.
2-52.1
