TM 10--3510--221--10
0009 00--17
LAUNDRY ADVANCED SYSTEM OPERATION UNDER USUAL CONDITIONS
ASSEMBLY AND PREPARATION FOR USE -- Continued
0009 00
ASSEMBLY AND PREPARATION FOR USE -- Continued
F. Establish Electrical Power Source
WARNING
Master power must be shutoff before connecting LADS power cable. Be careful not
to come into contact with high--voltage connections. Whenever possible, keep one
hand away from the equipment to reduce the hazard of current flowing through the
body’s vital organs. Failure to follow this warning may result in personnel injury or
death.
1. Determine what power source will be used to operate LADS. If the MEP--805A generator is to be used proceed
to step 3, otherwise continue to step 2.
2. Establish connection to electrical power source as follows:
a. Ensure MAIN DISCONNECT switch (1) on main control enclosure (2) is OFF. Position switch to OFF if
necessary.
b. Drive grounding rod (3) into the earth, near grounding lug (4), to a minimum depth of eight feet.
c. Ensure grounding wire (5) is attached to grounding lugs (4) and (6). Attach grounding wire if necessary.
d. Connect grounding wire (7) to grounding rod (3) and grounding lug (4).
e. If connected, disconnect power cable (8) at junction box (9).
f. Ensure external power source is not on.
g. Connect power cable (10) from power source to junction box (9). Proceed to step G.
3. Establish connection to MEP--805A generator as follows:
a. Ensure MAIN DISCONNECT switch (1) on main control enclosure (2) is OFF. Position switch to OFF if
necessary.
b. Drive grounding rod (3) into the earth, near grounding lug (4), to a minimum depth of eight feet.
c. Ensure grounding wire (5) is attached to grounding lugs (4), (6) and (9). Attach grounding wire if necessary.
d. Connect grounding wire (7) to grounding rod (3) and grounding lug (4).
e. Ensure MEP--805A generator is not on.
f. Ensure power cable (8) is connected at junction box (9) and MEP--805A generator. Connect power cable if
necessary.
