TM 10--3510--221--24
0114 00--1/2 blank
DRAINING WATER TANKS
0114 00
THIS WORK PACKAGE COVERS:
Draining Water Tanks
INITIAL SETUP:
Maintenance Level
Materials/Parts
Unit
Tools and Special Tools
Equipment Conditions
Tool Kit, General Mechanics (Item 1, WP 0272 00)
Power must be applied at main control
enclosure (WP 0112 00).
NOTE
If water tanks are being drained so that a faulty control valve can be replaced on water
manifolds under tank, it may be necessary to manually open the faulty control valve.
1. If a control valve is being replaced on a suction or discharge manifold under water tanks, and valve is failed
closed, continue to step 2, otherwise proceed to step 3.
2. Manually open faulty control valve (1) by rotating stem (2) until flats (3) are aligned with direction of water flow.
3. Perform a DRAIN CYCLE (TM 10--3510--221--10).
1
2
3
END OF WORK PACKAGE
