TM 10--3510--221--24
0189 00--2
IGNITION TRANSFORMER REPLACEMENT --
Continued
0189 00
7
8
9
10
6
4
5
11
1
3
2
INSTALLATION
1. Position new ignition transformer (6) onto subpanel (11).
2. Secure ignition transformer (6) with four screws (9) and lock washers (10).
3. Remove screw (7) and cover plate (8) from ignition transformer (6).
4. Insert wires into ignition transformer (6) and connect as tagged.
5. Install cover plate (8) onto ignition transformer (6), then secure with screw (7).
6. Connect ignition wires (5) to ignition transformer (6), then slide boots (4) over wires.
7. Close door (2) and secure to heater enclosure (3) by tightening four latches (1).
8. Use maintenance menu to test heating system (WP 0010 00).
END OF WORK PACKAGE