TM 10--3510--221--24
0239 00--2
LEVEL SENSOR REPLACEMENT -- Continued
0239 00
INSTALLATION
1. Position pressure sensor (5) in main control enclosure (10), then secure with two screws (6), flat washers (7),
lock washers (8), and nuts (9).
2. Connect electrical connector (2) to analog PCB (3) as tagged.
3. Install tiedown straps (1) securing sensor wiring together.
4. Turn handle (11) CW, then close door (12).
5. Secure door (12) to main control enclosure (10) by tightening eleven latches (13).
6. Access level sensor calibration function using maintenance menu (WP 0010 00), then set output of level
sensor to 0 inches or gallons as applicable.
7. Connect tube(s) (4) to pressure sensor (5) as tagged.
END OF WORK PACKAGE
