TM 10--3510--221--24
0237 00--2
5 AMP SSR FUSE REPLACEMENT -- Continued
0237 00
INSTALLATION
1. Using old fuse (4) as a guide, cut and bend lead wires of new fuse.
2. Insert fuse (4) into SSR PCB (5).
3. Insert SSRs (3) into SSR PCB (5).
4. Install retaining bar (2), then secure with three thumb screws (1).
5. Turn handle (6) CW, then close door (7).
6. Secure door (7) to main control enclosure (8) by tightening eleven latches (9).
7. Use maintenance menu (WP 0010 00) to verify normal operation as follow:
a. For SSRs 6 through 10 on SSR PCB3 test heating system.
b. For all other SSRs use control outputs function to verify correct operation of component controlled by SSR.
END OF WORK PACKAGE