TM 10-3510-222-24
2-39. BASKET AND CURB ASSEMBLY.
This task covers:
a. Removal
b. Installation
INITIAL SETUP
Tools
General Mechanics Tool Kit (App B, Item 1)
Automotive Vehicle Shop Equipment
(App B, Item 2)
Materials/Parts
Gasket (App C, Item 59)
Gasket (App C, Item 60)
Equipment Condition
Laundry Unit shut down (TM 10-3510-222-10)
Personnel Required
Four
General Safety Instructions
WARNING
Basket is heavy and requires at least four people to lift.
Using less than four people may result in injury.
a.
REMOVAL
(1)
Remove basket (1) from curb assembly (11).
CAUTION
Put chocks on side of basket to keep from rolling.
(2)
Tip basket (1) over to its side and remove eight screws (2), lockwashers (3) and post (4).
(3)
Remove two bolts (5), flat washers (6) and gaskets (7).
(4)
Remove nut (8), lockwasher (9) and drain clamp (10).
(5)
Remove curb assembly (11) from drive unit (15)
(6)
Remove two gaskets (12), gasket (13) and stud (14).
b.
INSTALLATION
(1)
Install stud (14) and position two gaskets (12) and gasket (13) on drive unit assembly (15).
(2)
Position curb assembly (11) on drive unit (15) and install drain clamp (10), lockwasher (9), nut (8), two
bolts (5), flat washers (6) and gaskets (7).
(3)
Install post (4) on basket (1) with eight screws (2) and lockwashers (3).
(4)
Position basket (1) in curb assembly (11).
2-98
