TM 10-3510-222-24
2-42. MOTOR ASSEMBLY.
This task covers:
a. Removal
b. Installation
INITIAL SETUP
Tools
General Mechanics Tool Kit (App B, Item 1)
Automotive Vehicle Shop Equipment (App B, Item 3)
Material/Parts
Gasket (App C, Item 71)
Tags (App D, Item 4)
Personnel Required
Two
Equipment Condition
Laundry Unit shut down (TM 10-3510-222-10)
General Safety Instructions
WARNING
Voltage in this equipment is high enough to cause
serious injury or death. Do not perform this task with
power on.
a.
REMOVAL
(1)
Remove bolt (1), lockwasher (2) and belt cover (4).
(2)
Remove belt guard (3).
(3)
Push motor (8) toward extractor to compress spring (21), mounted on belt tension bolt (20) and remove
belt (5).
(4)
Remove four screws (6), lockwashers (7) and motor (8) from motor mounting plate (23).
(5)
Remove two caps (9) and cover (10) from conduit box (22).
(6)
Disconnect and tag wires.
(7)
Remove nut (11), gasket (12) and box connector (13) from conduit box (22).
NOTE
To remove pulley from hub, it is necessary to thread pulley
mounting screws into threaded holes on pulley.
(8)
Remove three screws (14), lockwashers (15) and pulley (16) from shaft of motor (8).
(9)
Mark position of hub (18) on shaft of motor (8), loosen setscrew (17) and remove hub (18).
(10)
Remove key (19) from shaft of motor (8).
2-102
