TM 10-3510-222-24
2-55. IGNITION CABLES, SIGHT EYE, NOZZLE, FUEL PIPING, AND ELECTRODES.
This task covers:
a. Removal
b. Repair
c. Installation
d. Adjustment
INITIAL SETUP
Tools
General Mechanic's Tool Kit (App B, Item 1)
Automotive Vehicle Shop Equipment
(App B, Item 2)
Equipment Condition
Dryer shut down (TM 10-3510-222-10)
Materials/Parts
Antiseize Tape (App D, Item 17)
Antiseize Compound (App D, Item 24)
General Safety Instructions
WARNING
Voltage in this equipment is high
enough to cause serious injury or
death. Do not perform this task with
power on
a.
REMOVAL
(1) Remove cap (1), window (2), gasket (3) and disconnect flame control (4) from pipes (20) and sight eye (21).
(2) Remove six screws (5), lockwashers (6) and cover (7) from base (24).
(3) Remove nuts (8 and 9) and disconnect ignition cables (10 and 11) from electrodes (15).
(4) Pull ignition cables (10 and 11) from transformer contacts (22 and 23).
(5) Remove three screws (12), lockwashers (13) and base (24) from shutter assembly (25).
(6) Loosen two setscrews (14) on each electrode (15) and remove electrodes.
(7) Remove nozzle (16) from adapter (17).
(8) Remove adapter (17) from pipe (18).
(9) Remove elbow (19) from base (24).
b. REPAIR
Repair consists of replacing damaged or missing components of the ignition cables, sight eye, nozzle, fuel piping
and electrodes.
2-130