TM 10-3510-222-24
2-56. TRANSFORMER AND BOX.
This task covers:
a. Removal
b. Repair
c. Installation
INITIAL SETUP
Tools
General Mechanics Tool Kit (App B, Item 1)
Automotive Vehicle Shop Equipment (App B,
Item 2)
Equipment Condition
Ignition Cables removed (Para 2-55)
Solenoid wires removed from box
Dryer door switch wires removed from box
Motor wires removed from box
Materials /Parts
Adhesive (App D, Item 23)
Grommet (App C, Item 72)
Blind Nut (App C, Item 75)
Blind Nut (App C, Item 76)
Tags (App D, Item 4)
General Safety Instructions
WARNING
Voltage in this equipment is high
enough to cause serious injury or
death. Do not perform this task with
power on
a. REMOVAL
(1) Remove six screws (1) and cover (2). As required, remove gasket (3).
(2) Tag and disconnect transformer wires.
(3) Remove screw (4) and lockwasher (5).
(4) Remove screw (6), lockwasher (7) and transformer (12) from box (14).
(5) Remove two screws (8) and bracket (9) from transformer (12).
(6) Remove two screws (10) and bracket (11) from transformer (12).
(7) Unscrew three nuts (13) and remove three adapters (15) and gasket (16) from box (14).
(8) Remove nut (17), elbow (18) and gasket (19) from box (14).
(9) Remove two screws (20), lockwashers (21), nut (22) and box (14).
(10)As required, remove grommets (23) and blind nuts (24).
b. REPAIR
Repair consists of replacing damaged or missing components of the transformer and box.
c. INSTALLATION
(1) If removed, install blind nuts (24) and grommets (23).
(2) Install box (14) and secure with two screws (20), lockwashers (21) and nut (22).
(3) Position gasket (19) and elbow (18) on box (14) and secure with nut (17).
(4) Install three gaskets (16) and adapters (15) on box (14) and secure with nuts (13).
(5) Position bracket (11) on transformer (12) and install two screws (10).
2-134