TM 10-3510-222-24
3-21. WASHER DRAIN.
This task covers:
a. Removal
b. Repair
c. Installation
INITIAL SETUP
Tools
General Mechanics Tool Kit (App B, Item 1)
Automotive Vehicle Shop Equipment
(App B, Item 3)
Materials/Parts
Solder (App D, Item 9)
Flux (App D, Item 15)
Antiseize Compound (App D, Item 24)
Equipment Condition
Laundry Unit shut down (TM 10-3510-222-10)
General Safety Instructions
WARNING
High voltage is present on this
equipment.
Do
not
perform
maintenance with power on. Death
or serious injury may result.
a.
REMOVAL
(1)
Upper washer drain (1).
(a)
Remove hose (2) from coupling half (3).
(b)
Remove screw (4) from pipe holder (5).
(c)
Disconnect union (6) from lower washer drain (7).
(d)
Remove upper washer drain (1) from Laundry Unit.
(2)
Lower washer drain (7).
(a)
Remove hose (8) from coupling half (9).
(b)
Remove two nuts (10), lockwashers (11), bolts (12) and bracket (13).
(c)
Disconnect union (6) from upper washer drain (1).
(d)
Disconnect union (14) from nipple (15).
(e)
Remove lower washer drain (7) from Laundry Unit.
(3)
Pipe holder (5).
(a)
Remove upper washer drain (1).
(b)
Remove nut (16), lockwasher (17), two flat washers (18) and pipe holder (5) from bracket.
(4)
Hanger (22).
(a)
Remove lower washer drain (7).
(b)
Loosen nut (19) on hanger (22) and remove hanger (22).
(5)
Swing check valve (20).
(a)
Remove upper washer drain (1).
3-28
