TM 10-3510-222-24
3-22. WASHER.
This task covers:
a. Removal
b. Repair
c. Installation
INITIAL SETUP
Tools
General Mechanics Tool Kit (App B, Item 1)
Automotive Vehicle Shop Equipment
(App B, Item 2)
Automotive Vehicle Shop Equipment
(App B, Item 3)
Electrical Repair Shop Equipment (App B, Item 4)
Suitable Lifting Device
Personnel Required
Two
Materials/Parts
Antiseize compound (App D, Item 24)
Tie down straps (App D, Item 11)
Electrical connector (App C, Item 24)
Tags (App D, Item 4)
Sealing washer (App C, Item 64)
Equipment Condition
Laundry Unit shut down (TM 10-3510-222-10)
Front frame removed (Para 2-18)
Wet wash bin removed (Para 2-36)
Washer drain (upper and lower), and
lower washer hookup removed (Para 3-21)
General Safety Instructions
WARNING
High voltage is present on this
equipment.
Do
not
perform
maintenance with power on. Death
or
serious
injury
may
result.
a. REMOVAL
(1)
Open drain cock (13) on washer air tank (12).
(2)
When gauge on washer air tank (12) reads 0 psi, close drain cock (13).
(3)
Disconnect air hoses (2 and 3) from normal open valve (8) and normal closed valve (4).
(4)
Remove quick disconnect cap (5) from quick coupling half (6).
(5)
Remove quick coupling half(6) from elbow (7).
(6)
Remove four mounting studs (14) from belt guard (15).
(7)
Remove belt guard (15) from washer (1).
(8)
Remove quick disconnect coupling (16) from coupling half (17).
(9)
Remove coupling half(17) from elbow (18).
(10)
Remove elbow (18) from washer (1).
(11)
Remove fifteen bolts (11), lockwashers (10) and flat washers (9) from washer (1) and Laundry Unit.
(12)
Remove one nut (25), lockwasher (26), flat washer (27) and bolt (28) from washer (1) and Laundry Unit.
3-31
