TM 10-3510-222-24
3-71. TRUNNION.
This task covers:
a.
Removal
b.
Repair
c.
Installation
INITIAL SETUP
Tools
General Mechanics Tool Kit (App B, Item 1)
Automotive Vehicle Shop Equipment
(App B, Item 3)
Materials /Parts
Safety Wire, .0625 Dia. (App D, Item 21)
Personnel Required
Two
Equipment Condition
Laundry Unit shut down (TM 10-3510-222-10)
Roller Chain removed (Para 3-72)
General Safety Instructions
WARNING
Be sure power to dryer is off at circuit
breaker panel. Accidental start of dryer,
while performing this task could cause
injury.
a.
REMOVAL
(1)
Remove three screws (1), lockwashers (2) and cover (3).
(2)
Cut safety wire (5) and remove two screws (4), flat washers (6) and retaining plate (7).
(3)
Remove four screws (8), lockwashers (9) and flat washers (10).
(4)
Loosen setscrew (13) on sprocket (14) and remove trunnion assembly (11) from tumbler shaft (15).
(5)
Remove key (12) from tumbler shaft (15).
Figure 3-67. Trulnnion
3-163
