TM 10-3510-222-24
2-15. RIGHT BEAM.
This task covers:
a.
Removal
b.
Repair
c.
Installation
INITIAL SETUP
Tools
Equipment Condition
General Mechanics Tool Kit (App B, Item 1)
Laundry Unit shut down (TM 10-3510-222-10)
Automotive Vehicle Shop Equipment
Basket(s) removed (Para 2-13)
(App B, Item 2)
Upper sound controlling panels removed
(Para 2-22)
Materials/Parts
Blind Rivet (App C, Item 14)
General Safety Instructions
Blind Rivet (App C, Item 17)
WARNING
Personnel Required
High voltage is present on the generator. Do not
Two (for removal and installation)
perform maintenance with power on. Death or
serious injury may result.
a.
REMOVAL
(1)
Remove two single acting pins (1) from right beam (2), front frame (3) and rear frame (4).
(2)
Remove right beam (2) from front frame (3) and rear frame (4).
b.
REPAIR
(1)
Cargo Tiedown (5).
(a)
Remove two blind rivets (6) from strap loop (7) and right beam (2).
(b)
Remove cargo tiedown (5) from strap loop (7).
(c)
Install new cargo tiedown (5) on strap loop (7).
(d)
Install two blind rivets (6) in strap loop (7) and right beam (2).
(2)
Strap (10).
(a)
Remove two screws (8) from strap loop (9).
(b)
Remove strap (10) from strap loop (9).
(c)
Install new strap (10) on strap loop (9).
(d)
Position strap loop (9) on right beam (2) and install two screws (8).
(3)
Single acting pin (12).
(a)
Remove one blind rivet (11) from single acting pin (12).
(b)
Remove single acting pin (12) from right beam (2).
(c)
Position new single acting pin (12) on right beam (2) and install blind rivet (11).
(4)
Right beam (2).
(a)
Remove eight cargo tiedowns (5) from right beam (2).
(b)
Remove strap (10).
2-39
