TM 10-3510-222-24
2-16. CENTER BEAM.
This task covers:
a.
Removal
b.
Repair
c. Installation
INITIAL SETUP
Tools
Equipment Condition
General Mechanics Tool Kit (App B, Item 1)
Laundry Unit shut down.(TM 10-3510-222-10)
Automotive Vehicle Shop Equipment
Basket(s) removed (Para 2-13)
(App B, Item 2)
Upper sound controlling panels removed
Hand Blind Riveter (App B, Item 7)
(Para 2-22)
Materials/Parts
General Safety Instructions
Blind Rivet (App C, Item 14)
Blind Rivet (App C, Item 17)
WARNING
Tiedown Straps (App D, Item 11)
High voltage is present on the generator. Do not
perform maintenance with power on. Death or
Personnel Required
serious injury may result.
Two (for removal and installation)
a.
REMOVAL
(1)
Remove tiedown straps on air hoses from center beam (1).
(2)
Remove two single acting pins (2) from center beam (1), front frame (4) and rear frame (5).
b.
REPAIR
(1)
Cargo tiedown (8).
(a)
Remove two blind rivets (6) from strap loop (7) and center beam (1).
(b)
Remove cargo tiedown (8) from strap loop (7).
(c)
Install new cargo tiedown (8) on strap loop (7).
(d)
Install two blind rivets (6) in strap loop (7) and center beam (1).
(2)
Cargo tiedown (11).
(a)
Remove two blind rivets (9) from strap loop (10).
(b)
Remove cargo tiedown (11) from strap loop (10).
(c)
Install new cargo tiedown (11) on strap loop (10).
(d)
Position strap loop (10) on center beam (1) and install two screws (9).
(3)
Single acting pin (13).
(a)
Remove one blind rivet (12) from single acting pin (13).
(b)
Remove single acting pin (13) from center beam (1).
(c)
Position new single acting pin (13) on center beam (1) and install blind rivet (12).
2-42
