TM 10-3510-222-24
2-24. LOWER/DRYER PLATFORMS.
This task covers:
Repair
INITIAL SETUP
Tools
General Mechanics Tool Kit (App B, Item 1)
Automotive Vehicle Shop Equipment
(App B, Item 2)
Materials/Parts
Self-locking nut (App C, Item 15)
Blind Rivet (App C, Item 22)
REPAIR
(1)
Quick release pin (4).
(a)
Position lower and/or dryer platform (1) on its side.
(b)
Remove quick release pin (4) from mounting bracket (2).
(c)
Remove one blind rivet (3) from quick release pin (4).
(d)
Remove quick release pin (4) from lower and/or dryer platform (1).
(e)
Position quick release pin (4) on lower and/or dryer platform (1) and install blind rivet (3).
(f)
Install quick release pin (4) in mounting bracket (2) and lower and/or dryer platform (1).
(2)
Lower or high frame (9).
(a)
Position lower and/or dryer platform (1) on its side.
(b)
Remove quick release pin (4) from mounting bracket (2).
(c)
Remove two self-locking nuts (6), four washers (7) and two bolts (8) from mounting bracket (2) and
lower and/or high frame (9).
(d)
Remove two self-locking nuts (6), four washers (7) and two bolts (10) from lower and/or
dryer platform (1) and lower and/or high frame (9).
(e)
Remove lower and/or high frame (9).
(f)
Position lower and/or high frame (9) on platform/dryer footing (5) and install two bolts (10), four
washers (7) and two self-locking nuts (6).
(g)
Position mounting bracket (2) on lower and/or high frame (9) and install bolt (8), two washers (7)
and self-locking nut (6).
(h)
Install quick release pin (4) in mounting bracket (2) and lower and/or dryer platform (1).
2-59
