TM 10-3510-222-24
2-22. SOUND CONTROLLING PANELS .
This task covers:
a.
Removal
b.
Repair
c.
Installation
INITIAL SETUP
Tools
Equipment Condition
General Mechanics Tool Kit (App B, Item 1)
Laundry Unit shut down (TM 10-3510-222-10)
Automotive Vehicle Shop Equipment
(App B, Item 2)
General Safety Instructions
WARNING
Materials/Parts
Blind rivet (App C, Item 21)
High voltage is present on the generator. Do not
perform maintenance with power on. Death or
serious injury may result.
a.
REMOVAL
WARNING
Generator exhaust hoses may be extremely hot. Be careful when
working near and/or removing them as this could cause serious
injury to personnel.
(1)
Remove top sound controlling panels (1), do substeps below:
(a)
Release strap (10) from right and center beams (2 and 13).
(b)
Remove three top sound controlling panels (1) from right and center beams (2 and 13).
(2)
Remove side sound controlling panels (3, 5 and 6), do substeps below:
(a)
Release strap (12) from lower track (11).
(b)
Remove sound controlling panels (5 and 6) from lower track (11) and center beam (13).
(c)
Remove spacer plate (4).
(d)
Remove sound controlling panel (3) from lower track (11) and center beam (13).
b
REPAIR
NOTE
Both handles are identical. This procedure is for one of them.
(1)
Handle(s) (9).
(a)
Remove four blind rivets (7) from sound controlling panel (6).
(b)
Remove handle (9) and four flat washers (8).
(c)
Install handle (9), four flat washers (8) and blind rivets (7) on sound controlling panel (6).
2-54
