TM 10-3510-223-13&P 0017 00
CONTAINERIZED SELF SERVICE LAUNDRY (CSSL) MODEL A
UNIT MAINTENANCE
0017 00-1
FRESHWATER PUMP COVER AND POWER CORD
THIS SECTION COVERS:
Inspect
INITIAL SETUP
Materials/Parts
CSSL set up. Freshwater pump turned OFF
Maintenance Level
Unit
Tools and Special Tools
Tool Kit General Mechanic (WP 0045, Table 2, Item 1)
WARNING
This freshwater pump operates at high voltages. Use extreme caution.
Make sure freshwater pump is turned off before proceeding with the
following procedures. Touching a live wire can cause serious injury or
death.
INSPECT
Turn the freshwater pump switch on the roadside raceway to OFF.
Inspect the freshwater pump cover (1) for damage. Check condition of mounting screws (2) holding cover
to floor. Tighten if loose.
Check for bents and deformations of the cover particularly around the pressure switch (3) and gage (4)
that may interfere with proper operation of the pump (5).
Inspect the power cord (6). If power cord is frayed, broken, loose, or connector is unserviceable, refer to
direct support maintenance.
If cover and power cord are in satisfactory condition, turn the freshwater pump switch on the roadside
raceway to ON as needed.
