TM 10-3510-224-13&P
0040 00
5. Place the new space heater (1) on the mount (2).
6. Install two pan head screws (3) and washers (4) securing the heater to the bottom of the mount.
7. Install one pan head screw (5) and washer (6) securing the heater to the side of the mount.
8. Replace the wires (7) through the heater body and reattach them.
9. Secure the conduit (8) with the retained lock nut (9).
10. Reset circuit breaker #15 on the right side power distribution panel to ON.
.
7
1
9
8
2
5
4
6
3
END OF WORK PACKAGE
0040 00-3/(4 Blank)