TM 10-3510-224-13&P 0039 00
5. Remove and retain the motor ground wire (15) from the motor body.
6. Remove the front and rear motor clamps (16) by loosening the bolts (18).
7. Lift and remove the motor (9) from the motor mount (17).
REPLACE
1. Place the new motor (9) into the motor mount (17).
2. Re-attach the retained ground wire (15) to the fan motor and frame.
3. Replace the motor mount clamps (16) on the rear and front of the fan motor. Tighten the bolts (18).
4. Replace the fan blade (13) and tighten the set screw (14).
5. Feed the wires (10) back into the motor housing and seat the conduit in the mounting hole.
6. Reconnect the tagged wires.
7. Replace the grommet (7), plate (6) and screws (5) on the motor (9).
8. Turn circuit breaker #8 in the right side power distribution panel to ON.
9. Perform the test procedures above.
10. Reinstall the plate and grommet, using the retained screws.
11. Reinstall the external vent fan (3) cover using the retained screws.
12. Reinstall the internal vent fan cover (11) using the retained screws.
0039 00-2
