TM 10-3510-224-13&P
0005 00
PREPARE TEMPER WITH MODIFIED END SECTION FOR SHIPMENT.
To prepare the TEMPER section for movement, follow the procedures outlined. Clean and dry the tent fabric sections
and equipment as described below. Package the tent frame pieces into the TEMPER frame section cover.
CAUTION
3
5
2
4
1
Use caution when closing CSSL doors to avoid damage to lights. CSSL doors are
heavy and can break lights.
Striking procedures.
1. Locate the frame section cover and the light set storage container, close the personnel double doors, then proceed
as follows:
2. Have two soldiers gain access to the top of the container and loosen the boot lines (1) to the upper ISO fittings (2)
at the opposite end of the container. Have two soldiers on the ground remove the tent stakes (3) from the lower end of
the boot (4).
3. Have the soldiers on top of the container fold the boot back towards the TEMPER section and coil the boot lines
(1).
0005 00-45
