CONTAINERIZED BATCH LAUNDRY (CBL)
This manual contains an equipment description, operating instructions and maintenance procedures for
the Containerized Batch Laundry (CBL). It also includes references to publications that contain
information on separately documented components of the CBL. The CBL provides a fully automated
operation of washers and dryers with a capability to handle 150-200 pounds of laundry per hour.
Type of Manual: Operator's Maintenance
Model Number and Equipment Names:
43260001-1 Laundry, Containerized Batch, Model 2
43260001-2 Laundry, Containerized Batch, Model 3
Purpose of Equipment: To provide a fully automated operation of washers and dryers with a capability to
handle 150-200 pounds of laundry per hour.
MAINTENANCE FORMS, RECORDS, AND REPORTS
Department of the Army forms and procedures used for equipment maintenance will be those prescribed
by (as applicable) DA PAM 750-8, The Army Maintenance Management System (TAMMS) Users Manual;
DA PAM 738-751, Functional Users Manual for the Army Maintenance Management Systems - Aviation
(TAMMS-A); or AR 700-138, Army Logistics Readiness and Sustainability.
HAND RECEIPT (HR) MANUALS
This manual has a companion document with a TM number followed by "-HR" (which stands for Hand
Receipt). TM 10-3510-226-10-HR consists of preprinted hand receipts that list end item related
equipment (i.e., COEI, BII, and AAL) that must be accounted for. As an aid to property accountability,
additional HR manuals may be requisitioned through normal publication channels.
REPORTING EQUIPMENT IMPROVEMENT RECOMMENDATIONS (EIR)
If your CBL needs improvement, let us know. Send us an EIR. You, the user, are the only one who can
tell us what you don't like about your equipment. Let us know why you don't like the design or
performance. Put it on an SF 368 (Product Quality Deficiency Report). Mail it to the address specified in
DA PAM 750-8, The Army Maintenance Management System (TAMMS) Users Manual, or as specified by
the acquiring activity. We will send you a reply.
CORROSION PREVENTION AND CONTROL (CPC)
Corrosion Prevention and Control (CPC) of Army materiel is a continuing concern. It is important that any
corrosion problems with the CBL be reported so that the problem can be corrected and improvements
can be made to prevent the problem in future items. Corrosion specifically occurs with metals. It is an
electrochemical process that causes the degradation of metals. It is commonly caused by exposure to
moisture, acids, bases, or salts. An example is the rusting of iron. Corrosion damage in metals can be
seen, depending on the metal, as tarnishing, pitting, fogging, surface residue, and/or cracking. Plastics,
composites, and rubbers can also degrade. Degradation is caused by thermal (heat), oxidation (oxygen),
solvation (solvents), or photolytic (light, typically UV) processes. The most common exposures are
excessive heat or light. Damage from these processes will appear as cracking, softening, swelling, and/or
breaking. The form should be submitted to the address specified in DA PAM 750-8, The Army
Maintenance Management System (TAMMS) Users Manual.