TM 10-3510-226-23
0044 00
REPLACE-CONTINUED
NOTE
Ensure the retaining clamps are in place before connecting the fittings to the valves.
9. Connect fittings (Figure 6, Item 3) to the valves. Ensure the fittings are all correctly aligned.
10. Install the connecting hose (Figure 6, Item 6) and retain with hose clamps (Figure 6, Item 5).
11. Install the mounting bracket (Figure 6, Item 4).
12. Connect the clamps (Figure 6, Item 2) to the mounting bracket.
13. Connect wiring and internal hoses to valve (Figure 5, Item 1) as tagged
14. Install washer IAW procedures given in WP 0041 00.
1
1
Figure 5. Replace the Washer Water Inlet Valve (2-Way Valve).
0044 00-10
