TM 10-3510-226-23
0045 00
REPLACE-CONTINUED
NOTE
The switch halves are marked for alignment to ease reassembly.
NOTE
When installed, the switch may be free to rotate within the limits imposed by the wiring.
12. Install the halves of the emergency stop switch (Figure 4, Item 9) into the control panel (Figure 4,
Item 6) and lock halves together.
13. Tighten the screw (Figure 4, Item 7) securing the retaining catch (Figure 4, Item 8) of the emergency
stop switch (Figure 4, Item 9).
14. Close the control panel (Figure 4, Item 6).
15. Connect washer power cord and monitor for normal operation.
0045 00-8
