TM 10-3510-226-23
0047 00
REPLACE-CONTINUED
7. Install replacement temperature sensor (Figure 1, Item 1) in grommet seal.
8. Connect replacement temperature sensor wiring (Figure 1, Item 3) to microprocessor board (Figure
1, Item 2).
9. Install wire ties as necessary to secure temperature sensor wiring (Figure 1, Item 1).
10. Close control panel, and install washer IAW procedures given in WP 0041 00.
11. Operate washer IAW TM 10-3510-226-10 and monitor for normal operation.
3
1
3
2
Figure 1. Replace the Temperature Sensor.
END OF WORK PACKAGE
0047 00-2