TM 10-3510-226-23
0069 00
REPLACE-CONTINUED
10. Remove the screw retaining the replacement burner primary control (Figure 13, Item 1) and remove
primary control.
11. If necessary, knock out the penetration for the conduit in the junction box.
12. Install conduit (Figure 13, Item 24) and retain with locknut.
13. Connect wiring as tagged.
14. Install the burner primary control (Figure 13, Item 1) and retain with screws.
15. Connect power, bleed fuel pump, and monitor for normal operation.
Figure 13. Replace the Burner Assembly.
0069 00-23
