TM 10-3530-207-14
4-54. BUTTON SEWING MACHINE STAND ASSEMBLY MAINTENANCE - continued.
Assembly.
(1)
Install base (1) onto the lower left leg (2) and the lower right leg (3). Secure with two
bolts (4), two flat washers (5) and two square nuts (6).
(2)
Install the pipe support (7) onto the lower left leg (2). Secure with bolt (8), two flat
washers (9), lock washer (10) and a square nut (11).
(3)
Install the pipe support (7) onto the lower right leg (3). Secure with bolt (8), two flat
washers (9), lock washer (10) and a square nut (11).
(4)
Slide and install the treadle support (12) through both pipe supports (7). Position the
lower left leg assembly (2) and the lower right leg assembly (3) and the ends of t
he pipe.
(5)
Install four folding clips (13). Secure with four bolts (14), four flat washers (15), four lock
washers (16) and four wing nuts (17).
4-132
