TM 10-3530-207-14
4-59. HEAT SEALER BLOCK ASSEMBLY MAINTENANCE - continued.
Assembly.
(1)
Install thermostat knob (1) and secure with set screw (2).
(2)
Install teflon wrap (3). Secure with two wrap bars (4) and eight bar wrap screws (5).
Installation.
(1)
Place heat sealer assembly (1) into the stand so that it contacts the handle (2).
(2)
Rotate handle (2) clockwise until the heat sealer assembly (1) is supported.
(3)
Install cord clamp (3) and secure with the clamp screw (4).
(4)
Install Heat Sealer onto the table (para 2-8).
4-148
