TM 10-3530-207-14
5-5 HOLDDOWN CLAMP ASSEMBLY REPLACEMENT - continued.
Cleaning.
(1) Clean the holddown clamp assembly with a solution of detergent (Appendix F, Item 11)
and water.
(2) Rinse thoroughly with fresh water.
(3) Allow to dry.
Installation.
(1) Place outside bracket (1) and
inside plate (2) into position.
(2) Lower cabinet (para. 5-6).
(3) Install three screws (3),
three washers (4),
and three nuts (5).
(4) Install clamp arm (6),
washer (7), and bolt (8).
(5) Install pin (9).
5-5