TM 10-3530-207-14
5-9. REAR DOOR ASSEMBLY MAINTENANCE - continued.
Cleaning
(1) Clean the door with a solution of mild
soap and water.
(2) Rinse thoroughly with clean water.
(3) Allow to dry.
Repair. Repair of the rear door is limited to
the following.
(1) Replacement of gasket.
(a) Drill out and remove the rivets
(1) securing the outside edge of
the channel (2).
(b) Remove the nuts (3), washers,
(4), screws (5), and gasket
retainer (6).
(c) Remove gasket (7) and clean the
gasket mounting area.
(d) Install new gasket (7) into
position. Make sure gasket
slips under outside edge of
channel (2).
(e) Drill a 3/16 inch hole through
the gasket using the retainer (6)
and the channel (2) as a
template.
(f) Install gasket retainers (6),
screws (5), washers (4), and nuts
(3). Tighten hardware securely.
5-16