TM 10-3530-207-14
5-9. REAR DOOR ASSEMBLY MAINTENANCE - continued.
(g)
Install rivets (1) using the rivet
tool kit (Appendix B, Item 4) to
secure outside edge of the
channel (2) to door panel (8).
(2)
Replacement of latches.
(a)
Remove six nuts (1), six
washers (2), and screws (3).
(b)
Remove latch assembly (4)
and scrape off old sealing
compound.
(c)
Apply sealing compound
(Appendix F, Item 7) to the
flange of the new latch (4).
(d)
Install new latch assembly
(4) to door (5).
(e)
Secure latch (4) with six
screws (3), six washers (2),
and six nuts (1).
(f)
Wipe excessive sealing
compound away using a
wiping rag (Appendix F,
Item 2).
(3)
Replacement of hasp.
(a)
Drill out and remove the
five rivets (1) that secure
the hasp (2) to the door (3).
(b)
Remove the hasp) (2).
(c)
Install a new hasp (2) into
position.
(d)
Install five new rivets (1)
using the rivet tool set
(Appendix B, Item 4) to
secure hasp (2) to door (3).
5-18
