TM 10-3530-207-14
5-41. DARNING SEWING MACHINE CLUTCH AND MOTOR ASSEMBLY MAINTENANCE - continued.
Assembly.
(1) Install key (1), and pulley (2). Secure with setscrew (3). Make sure pulley (2) is against the wall of
the shaft.
(2) Install guard cover (4). Secure with two lockwashers (5) and two screws (6).
(3) Install guard cover (7). Secure with two lockwashers (8) and two screws (9).
Installation.
(1) Install clutch and motor (1) onto the sewing table top (2). Secure with three carriage bolts (3), three
flat washers (4), three lockwashers (5) and three nuts (6).
(2) Connect wires to motor as previously tagged.
(3) Hold the motor back cover In place with two screws (9).
(4) Tighten two screws (8) on the clamp connect (7).
Adjustment. Adjust clutch with adjustment
wing nut for proper clutch engagement.
5-120
