TM 10-4510-208-13&P
0006 00
Placement of End Section
1. Identify end section (1). Regular end section has zip doors (2) rather than the bootwall attachment on
the modified end section.
2. Place large spindle grommet located at peak of end section over ridge spindle (3) opposite container.
2
3
1
3. Identify the ridge extender (4). Place the ridge extender over the ridge spindle (3) opposite the
container.
4. Align holes in ridge spindle (3) and ridge extender (4).
NOTE
Ensure that the weather flap fabric is slid under the ridge extender before inserting the
hitch pin.
5. Install the attached hitch pin (5) through holes in ridge extender (4) and spindle (3), ensuring it
secures both components.
5
4
3
0006 00-14
