TM 10-4510-208-13&P
0040 00
WARNING
The pressure tank is heavy, bulky and is a tight fit in the pump frame. Two people are
required to remove the pressure tank from the frame. Failure to observe safety
precautions may result in hand and finger injuries.
14. Replace the pressure tank (7) in the pump frame (8), and secure with the four pressure tank mounting
bolts (6).
15. Install the pressure switch conduit (5), and secure with the conduit locknut.
16. Install the pressure switch wires on the appropriate terminals.
17. Replace the cover on the pressure switch (4).
18. Replace the -inch discharge hose (3), and secure with hose clamps.
19. Install the motor overload and relay mount (2), and secure with mounting bolt (1).
2
1
3
7
11
5
6
9
4
10
0040 00-5