TM 10-4510-208-13&P
0043 00
5
4
3
2
1
6
REPLACE
Replace a Defective Receptacle
WARNING
Always secure and tag circuit breakers OFF before attempting any electrical repairs,
even minor tasks such as replacing a bulb. Remember that the shower is a wet
environment, and capable of posing a shock hazard even when personnel are not in
direct contact with metal parts. Failure to observe safety precautions may result in
serious injury or death to personnel.
1. Set all circuit breakers (1) to the OFF position.
2. Disconnect 60A power service cable (2) from power input panel (3).
3. Remove screws (4) securing panel (3) and remove panel.
4. Remove screws (5), washers, and nuts securing receptacle (6) to panel (3).
0043 00-4
