TM 10-4510-208-13&P
DIRECT SUPPORT MAINTENANCE
CONTAINERIZED SHOWER
(NSN 4510-01-477-7763)
SHOWER, ENCLOSED UNIT, SYSTEM
(NSN 4510-01-470-1398)
SUMP PUMP ASSEMBLY
REPLACE
INITIAL SETUP
Tools
Personnel Required
Shop Equipment Automotive Maintenance and
Two
Repair: Organizational Maintenance, Common
No. 1 (Item 4, WP 0048 00)
Equipment Condition
Containerized Shower / Shower,
Enclosed Unit, System set up, power
Materials/Parts
Tags, Wire (Item 41, WP 0075 00)
supply disconnected. Set sump pump
Tape, Anti-seize (Item 42, WP 0075 00)
circuit breaker No. 8 to the OFF position
Tape, Electrical (Item 44, WP 0075 00)
(Containerized Shower only).
REPLACE
Replace a Damaged Sump Pump
WARNING
Protective clothing and equipment must be worn. Heavy-duty rubber apron, rubber
gloves, safety splash goggles and/or face shield are required when potential exists for
contact with waste water or contaminated surfaces. Wastewater and surfaces may be
contaminated with pathogenic microorganisms, bacteria or viruses, which present a risk
of serious illness or death to personnel.
1. Remove the padeyes (1) from the equipment mounting platform (2). (Containerized Shower only.)
2. Remove the screws securing the equipment mounting platform (2). (Containerized Shower only.)
WARNING
The equipment mounting platform is heavy, awkward, and difficult to maneuver. Wear
protective gloves before handling. To prevent injury, two persons are required to remove
and carry it. Failure to observe safety precautions may result in serious injury to
personnel.
WARNING
The equipment mounting platform may have sharp edges and corners. Wear protective
gloves before handling. Failure to observe safety precautions may result in serious injury
to personnel.
3. Lift the equipment mounting platform (2) off the mounting rails (3) and place it outside the shower.
(Containerized Shower only.)
0045 00-1
