TM 10-4510-209-13&P
0036 00
Replace Toilet Paper Dispenser (CLS only)
NOTE
Close toilet seat cover to ensure hardware is not lost.
NOTE
Two personnel are required to accomplish these procedures. Dispensers in stalls 1 and
2, 5 and 6 are mounted together.
1. Remove cotter pin (1) and roll holder (2) from dispenser (3). Retain roll holder (2).
2. Using a ratchet and screwdriver, remove screws (4), flat washers (5), and nuts (6) securing dispenser
(3) to partition.
3. Using a ratchet and screwdriver, secure new dispenser (3) to partition with screws (4), flat washers
(5), and nuts (6). Do not over tighten hardware.
4. Reinstall toilet paper, roll holder (2) and cotter pin (1).
6
1
5
4
2
3
END OF WORK PACKAGE
0036 00-5/(6 Blank)
