TM 10-4510-209-13&P
0055 00
REPLACE
Replace Faucet
1. Close water at sink supply valves (1).
NOTE
Use two wrenches when disconnecting the hose from the tubing one to steady the
hose, and one to loosen the compression fitting.
2. Disconnect the water supply tubing lower compression fittings (2) from the water supply hoses (3).
3. Remove the faucet retaining nuts (4) from the faucet (5).
4. Remove the faucet (5) and base gasket.
5. Loosen the water supply tubing upper compression fittings (6), and remove the tubing (7) from the
faucet (5).
6. Install the water supply tubing (7) onto the replacement faucet, and tighten the upper compression
fittings (6).
7. Install the replacement faucet (5) with base gasket.
8. Install and tighten the faucet retaining nuts (4).
NOTE
Use two wrenches when connecting the hose to the tubing one to steady the hose, and
one to tighten the compression fitting.
9. Connect the water supply tubing lower compression fittings (2) to the water supply hoses (3).
10. Open water supply valves (1) and check for leaks.
0055 00-3
